Precision gears & drive parts
POM and PA66 gears, worm gears and drive assemblies molded to AGMA-grade tooth profiles; low backlash, low noise, rated for the appliance's full duty cycle.
INDUSTRIES
Gears that stay quiet, seals that hold, control parts that click the same way on cycle one and cycle ten thousand. HAFO molds and machines the precision functional parts inside home appliances — the parts your customers never see but always feel.
Send a drawing for a 24-hour quote. Free DFM review, T1 samples with a full measurement report, and batch QC on every order.

Haitian presses from 90T to 470T, including two 360T two-shot machines — gears, seals and control parts molded in POM, PA66, PBT and PC/ABS, every batch checked against the drawing before it ships.
69 machining centers hold ±0.025 mm on shafts, bearing seats and metal inserts for appliance motors and gearboxes — machined in-house, so molded and machined parts arrive matched, not just together.
STEP, STP, IGES, STL, X_T and 2D PDF accepted. Files are confidential; NDAs welcome.
POM and PA66 gears, worm gears and drive assemblies molded to AGMA-grade tooth profiles; low backlash, low noise, rated for the appliance's full duty cycle.
housings, impellers, end caps and brackets in glass-filled nylon and PBT; CNC-machined shafts and bearing seats to ±0.025 mm.
hard/soft overmolded gaskets, door seals, knobs and handles on our 360T two-shot machines; no secondary assembly, no adhesive.
control-panel housings, detergent drawers' precision internals, hinge and latch mechanisms in PC/ABS and engineering plastics.
tooth-profile and shrinkage control at mold design, so gearboxes run quiet without post-machining.
two-shot molding bonds the seal to the housing in one shot; no glued gaskets to age and fail.
moldflow-checked gating and cooling on flat panels and covers; flatness held across the full diagonal.
masterbatch locked to your approved plaque; every batch checked against it before packing.
on Haitian presses from 90T to 470T, including two 360T two-shot machines — gears, seals and control parts in POM, PA6/PA66, PBT, PC/ABS and functional-grade PP.
hard/soft overmolding on our 360T two-shot machines — gaskets and door seals bonded to the housing in one shot, plus soft-touch knobs and handles; no secondary assembly, no adhesive.
for metal inserts, shafts and bearing seats in aluminum and steel — 69 machining centers, ±0.025 mm on the dimensions you mark as precision.
injection molds built in-house in P20, 718H and S136 steels — single and multi-cavity, family and hot-runner tools, moldflow-checked before steel is cut.
POM, PA6/PA66 (+GF), PBT, PC/ABS and functional-grade PP for molded parts; TPE/TPU for seals and soft-touch zones; mold steels P20/718H/S136.
±0.05 mm on molded precision parts; ±0.025 mm on machined metal parts — critical dimensions measured and reported every batch.
TOLERANCES AND QUALITY CONTROL
±0.13 mm (±0.005 in) standard on metal, ±0.025 mm (±0.001 in) on the dimensions you mark as precision — bracket hole patterns, sealing faces and locating features, usually.
±0.25 mm standard, ±0.05 mm precision on suitable dimensions. We sort this out at DFM, so nobody promises a molded dimension that physics will not hold.
HAFO Mould is ISO 9001:2015 certified (scope: Manufacturing of Hardware Molds and Parts). On request you can have PPAP documentation, CMM reports, dimensional reports, material certificates, surface finish certificates, FAI reports, and pre-shipment photos or video of your actual parts.
those are the ones measured and reported every batch. Full inspection setup: Quality & Inspection. The equipment behind it: Our Factory & Equipment.
Send the 3D file plus 2D drawing, material and estimated volumes — an engineer reviews manufacturability and tolerance realism and quotes within 24 hours. NDAs welcome.
mold design and moldflow analysis check gating, cooling and shrinkage before steel is cut, so tooth profiles and sealing faces come out right first time.
T1 molded samples shipped for your approval, with a full measurement report on the dimensions you marked as critical.
we produce only after you approve the T1 samples and the measurement report — no surprises in mass production.
mass production with batch QC and locked color/texture standards — parts checked against the drawing before packing.
Injection Molding · CNC Machining · Consumer Products · Electronics
Send your drawing and material notes — an engineer reviews them free and quotes within 24 hours. Get a Quote — Contact Us · Cost Calculator.