Instant, transparent estimates built on the same formulas our engineers use to quote — the same numbers published in our injection molding and CNC machining cost guides. No sign-up, no email required to see your estimate.
Cost per part = tooling amortisation + material + machine time + secondary operations, adjusted for scrap. Mid-range China factory figures — not the cheapest, not the most expensive.
| Per-part breakdown | USD |
|---|---|
| Material (incl. runner share) | — |
| Machine time | — |
| Secondary operations (degating, inspection, packing) | — |
| Running cost per part (incl. 3% scrap allowance) | — |
| Tooling amortisation (mold ÷ quantity) | — |
| Total cost per part | — |
| Quantity | Cost per part |
|---|
Instant estimate — for reference only. Exact quote within 24 hours after DFM review.
Assumptions: mid-size press at $28/h; cold-runner allowance of 20% of one part's weight per shot, shared across cavities; secondary operations $0.05/part; scrap 3%. Most custom molds run $2,000–$30,000 — see our Injection Molding Cost guide for the full formula and a worked example.
Unit price = material + machine time + tooling/finishing/inspection allowance + (setup & programming ÷ quantity). Mid-range China rates: 3-axis milling $20–50/h, turning $20–45/h, 5-axis $60–120/h — this calculator uses the middle of each range.
| Per-part breakdown | USD |
|---|---|
| Material (blank) | — |
| Machine time | — |
| Tooling wear, standard finishing, inspection & packing | — |
| Setup & programming share | — |
| Production efficiency at volume | — |
| Total cost per part | — |
| Quantity | Cost per part |
|---|
Instant estimate — for reference only. Exact quote within 24 hours after DFM review.
Defaults mirror the worked example in our CNC Machining Cost in China guide: a 6061 bracket, 21 minutes of 3-axis time, $4.60 blank — about $26/part at 50 pieces in the guide, about $118 as a one-off and about $11.80 at 1,000 pieces. No MOQ at HAFO: 1-piece prototypes to production runs.
STEP file preferred, plus a 2D drawing for tolerances and finishes. An engineer — not a salesperson — reviews every RFQ, and the DFM feedback is free.