INDUSTRIES

Precision Consumer Product Parts — Custom Molds, Molded & Machined Parts

An electric toothbrush is a small product with nowhere to hide. The two housing halves have to meet without a visible step. The seal has to keep water out for years, not weeks. The little gear train has to run quietly, and the button has to feel right on the ten-thousandth press.

None of that is commodity molding — it is precision work in miniature, and it is the end of the consumer market we build for. HAFO Mould is a build-to-print factory in Dongguan, near Shenzhen, China.

media-generation-electric-toothbrush-precision-0-9682162b-094c-458b-b4e4-d54bc1bce4d6
Electric toothbrush with precision molded housings, drive gear and sealing ring

Since 2007 we have made custom injection molds, injection molded parts, CNC machined parts and rubber components for precision consumer products: personal-care devices, small home appliances, wearables and smart-home hardware.

Send us your drawings — we quote the tooling and the parts together, and if a part is not a good fit for us, we tell you that up front instead of after you have paid for a mold.

Small Parts, Real Tolerances

A toothbrush gear that is 0.05 mm off does not fail loudly — it just sounds cheap. Sealing grooves, snap fits, gear teeth and button travel are all tolerance work, and they are what we are set up for:

metal parts machined to ±0.025 mm, molded parts held to your drawing and checked on fully automatic CMMs before they are packed.

Two-Shot and Overmolding, Done In-House

Soft grips, sealed buttons and waterproof rings work when the soft material is molded onto the rigid core in the tool — bonded in the mold, not glued on afterwards.

We run two-color and overmolding machines in our own molding shop, so the grip on a personal-care handle, the legend on a button and the seal around a housing are one part when they leave the mold, not three parts hoping to stay together.

We Check the Design Before We Cut Steel

Most molding problems are drawing problems that got expensive. Wall thickness, draft, gate position, where the parting line will sit on a cosmetic face — we review all of it in a free DFM pass before tooling starts, and we put the changes we recommend in writing with the quote.

It is much cheaper to move a rib in CAD than in hardened steel.

Your Launch Stays Confidential — and With One Factory

Unreleased products are the most valuable files a brand owns. Consumer designs are treated as confidential by default, NDAs are welcome, and your files stay inside our building.

The same engineers who machine your prototypes build your tool and run your production, so what was learned at prototype stage does not get lost in a supplier change halfway to launch.

Precision Parts We Make for Consumer Products

Electric Toothbrushes & Personal-Care Devices

The product class we know best in this industry: two-part housings that must seal, transmit motion and survive a wet bathroom for years. • Upper and lower housings with sealing grooves held to drawing, so the waterproof design you tested is the one that ships

• POM drive gears and transmission parts — small, quiet-running, wear-resistant • Buttons and charging-base shells, two-color molded legends that cannot rub off • Silicone and TPE sealing rings, overmolded or supplied as separate rubber parts

Made with: injection molding · two-shot & overmolding · CNC machining (metal drive parts) · rubber molding

Small Home Appliance Functional Parts

Not the big commodity shells — the working parts inside: the ones that turn, pump, click, heat and wear. • Control knobs, dial rings and gear trains for coffee machines, blenders and kitchen devices

• Motor brackets, pump housings and water-path parts with real sealing and pressure requirements • Insert-molded parts — metal bushings and shafts molded into plastic carriers • Heat-exposed functional parts in glass-filled nylon and other engineering resins

Made with: injection molding · insert molding · CNC machining · CNC turning

Consumer Electronics & Wearable Parts

Enclosures and small mechanisms where fit and surface decide whether the product feels premium or feels returned. • Device enclosures and shells with gap-free mating faces and clean cosmetic surfaces

• Headphone yokes, hinges and small structural parts in plastic and machined aluminum • CNC machined metal accents, rings and hardware; zinc die-cast handles and knobs for weight and feel — cast at our long-term partner foundry, then finished, assembled and inspected at HAFO

• Brackets, clips and internal frames that nobody sees but everybody feels when they flex

Made with: CNC machining · injection molding · partner-factory die casting + HAFO finishing & QC

Smart-Home & Handheld Devices

Sensor housings, remote controls and handheld units — small runs, high cosmetic standards, frequent design revisions. • Sensor and detector housings with lens windows and precise internal mounting features

• Two-color covers with molded-in icons and legends — no printing to wear away • Soft-touch overmolded grips on rigid cores for tools and handheld instruments • Short pilot runs from the production tool, so market testing uses real parts, not lookalikes

Made with: injection molding · two-shot & overmolding · CNC prototypes

One Factory From First Prototype to Repeat Orders

01 — CNC prototypes, from 1 piece.

Real-material parts for fit, function and the review meeting. If the design is going to change, this is where it should change.

CNC Machining

02 — Design freeze, with molding in mind.

We freeze the drawing only after draft, wall thickness, tolerances and cosmetic faces have been checked against the molding process — the DFM notes stay with your file.

03 — Tooling, staged to your risk.

If volumes are unproven, start with the simpler tool and step up when the orders do. We will show you both routes in the quote, with the reasoning in writing.

Injection Molding Cost Guide

04 — Production molding and repeat supply.

The production tool runs in the same building that built it. Batch inspection reports come with your shipment, and reorders run against the same tool, same settings, same engineers.

Our Factory & Equipment

Not every product needs every stage.

If your design arrives molding-ready, we start at the tool. If volumes stay small, CNC machining may stay the right process for good — the quote will say so.

Materials That Earn Their Place in Precision Consumer Products

Material choice on a small precision part is a tolerance decision as much as a cost one — resins shrink differently, and the tool is cut for the resin you freeze. These are the materials we reach for most on this page's products:

ABS

Clean cosmetic surface at a sensible cost — Appliance covers, shells, housings — Keep it away from sustained heat

PC

Impact strength; transparent when needed — Clear covers, guards, lens windows — Can stress-crack with some chemicals — tell us what it touches

PC+ABS

Toughness plus finish, the handheld-device default — Device housings, remote controls — Our most-quoted housing blend

POM (acetal)

Low friction, low wear, holds small features — Toothbrush drive gears, sliders, clips — Shrinks more than ABS — tolerances are planned around it, not hoped for

PA6 / PA66 + glass fiber

Strength and heat resistance — Motor brackets, gear carriers, pump parts — Fiber direction affects warp; gate position matters

PP

Living hinges and low-cost moving parts — Caps, hinged lids, clips — Paint and glue do not like it — design joins mechanically

TPE / TPU (overmold)

Grip and seal in one molding step — Soft grips, buttons, sealing rings — Bonds to selected core resins — we confirm the pairing at DFM

Silicone rubber

Waterproof sealing and skin contact — Sealing rings, keypads, protective sleeves — Molded as rubber parts and assembled, or paired with overmolding

Aluminum 6061 (CNC)

Light metal parts with a premium feel — Accents, rings, shafts, brackets — Anodizing gives durable color

Zinc alloy (die-cast)

Weight and solidity in small metal parts — Handles, knobs, faucet-style controls — Cast at our partner foundry; machining, finishing and inspection at HAFO

Finishes

Mold textures and polished cosmetic faces, matte or gloss, color matched to your Pantone reference or master sample. Legends and icons are best molded in with two-color tooling — they cannot wear off, because they are material, not ink.

Quality, Stated in Consumer Terms

HAFO Mould is ISO 9001:2015 certified. Inspection runs on three fully automatic CMMs, and trial and production parts are checked against your drawing before packing — for consumer parts that means the dimensions that decide fit, sealing and feel, not a sample of convenient ones.

Quality & Inspection

On request with your order: CMM and dimensional reports, material certificates, first-article (FAI) reports, and pre-shipment photos or video — what you need to approve parts you cannot stand next to.

Color and cosmetic faces are checked against your master sample or Pantone reference before a batch ships.

One honest boundary: we make parts and tooling; we are not a product-certification body. If your product needs regulatory testing or certification for its market, that stays with your compliance partner — our material certificates and inspection reports are written to feed into that process.

Our Factory & Equipment

FAQ

Related pages

Got a Precision Consumer Product Heading for Market?

Send the design. Prototypes start at 1 piece, the DFM review is free, and you will have a quote — tooling and parts together — within 24 hours. If the part is not right for us, you will hear that in the same reply, with the reason.