HAFO MOULD

CNC Machining Services in China

HAFO Mould machines custom CNC parts in Dongguan, near Shenzhen, China — covering 3-, 4-, and 5-axis milling and CNC turning from 1-piece prototypes to production runs with no minimum order quantity. Send your STEP file or drawing for a free engineering DFM review and firm quote within 24 hours.

Typical China shop rates run $20–50/hour for 3-axis milling and $60–120/hour for 5-axis work, while exact pricing depends on your drawing.

5-axis CNC machining center workshop at HAFO Mould in Dongguan, China
HAFO Mould's Dongguan factory — 69 CNC machining centers.

By the numbers

CNC Machining at a Glance

Precision CNC machining in Dongguan, near Shenzhen, China since 2007.

2007
Since
Build-to-print machining in China since 2007 under ISO 9001:2015.
69
CNC centers
38 three-axis, 13 four-axis, and 18 five-axis CNC machining centers.
±0.025 mm
Precision
Precision tolerances to ±0.025 mm where marked on drawings.
24-Hour
Quote
Free DFM review and quotation within 24 hours.

CNC Machining Capabilities

Machining Capabilities at a Glance

Five capability areas supporting build-to-print parts in China: 5-axis machining, 3/4-axis milling, CNC turning, materials, and quality inspection.

01 / 5-Axis Machining1

5-Axis Machining

18 five-axis centers for complex geometry in one setup.

18 five-axis centers
5-Axis CNC Machining Parts
02 / 3/4-Axis Milling2

3/4-Axis Milling

38 three-axis + 13 four-axis centers, max travel 800 mm.

38 three-axis + 13 four-axis centers
03 / CNC Turning3

CNC Turning

Turning parts to Ø500 × 1,500 mm.

Ø500 × 1,500 mm
CNC Turning Parts
04 / Materials4

Materials

6061/7075 aluminum, stainless steel 303/304/316, brass, POM, PA, PC.

Aluminum, stainless steel, brass, plastics
Materials We Machine
05 / Quality5

Quality

3 automatic CMMs, ISO 9001:2015, full inspection reports on request.

ISO 9001:2015 · 3 automatic CMMs
Quality & Inspection
06 / Cost Calculator6

Cost Calculator

Estimate your part cost in minutes with our free CNC machining cost calculator.

Free cost estimate
CNC machining cost calculator
cnc machined aluminum pump housings

What We Machine

Most parts we machine fall into housings and enclosures, brackets and mounting plates, manifolds and valve bodies, shafts and bushings, and impellers or multi-face parts with curved surfaces.

If a part is prismatic, we mill it; if it turns, we turn it; if it does both, the 5-axis centers finish it in one setup instead of passing it between machines.

five axis machining with coolant close up

How a Job Runs, From Drawing to Shipped Parts

Send your STEP or CAD file and 2D drawing with material, quantity, and finish requirements. Within 24 hours you receive a quote along with DFM notes if wall thickness, internal corners, or non-critical tight tolerances can be improved before machining starts.

Once approved, we program toolpaths, machine a first article, and measure it on an automatic CMM so you can review first-article results before the full run proceeds.

polished stainless steel ring top view

Tolerances and Inspection

Precision features are held to ±0.025 mm on metal parts and ±0.05 mm on machined plastics where specified on the drawing and verified at first article.

Three automatic CMMs perform dimensional inspection, and material certificates and dimensional reports are available on request — often requested on the first order and per batch thereafter.

Milling envelope

up to 800 mm travel (3/4-axis)

Turning envelope

Ø500 × 1,500 mm

Standard tolerance

±0.025 mm (metal) · ±0.05 mm (plastics)

Finishes

anodizing, bead blasting, powder coat, e-coat, passivation, electropolishing

Inspection

3 automatic CMMs, first-article and batch reports

Operator at the control of a five-axis CNC machining center

What It Costs

Machining cost follows machine time, setup count, material, tolerances, and finishing. Typical China hourly rates are $20–50/hour for 3-axis milling, $25–40/hour for 4-axis milling, $60–120/hour for 5-axis machining, and $15–25/hour for turning.

See worked examples in the CNC machining cost guide or estimate a reference figure in the cost calculator.

Contact page

Send your drawing for an exact price — quoted within 24 hours.

Contact us

Frequently Asked Questions

CNC Machining — Frequently Asked Questions

Answers on CNC machining costs, tolerances, CAD/2D drawing files, and order quantities.

Ready to check your part? Send your STEP file for a free DFM review and quote within 24 hours.

Get a Quote

Send Your STEP File for a Free DFM Review — and a quote within 24 hours.

Send your STEP file for a free DFM review and a quote within 24 hours — [email protected] or WhatsApp +86-13686606116.